Why Unagi Scooter Won’t Turn On? (Top Reasons!)

Why Unagi Scooter Won’t Turn On? If you’re facing the frustrating issue of your Unagi scooter not turning on, several factors could be at play.

The most common reasons include a drained battery, faulty power connections, or even a malfunctioning ignition switch.

To solve these issues and get your Unagi scooter up and running smoothly again, we’ll delve into detailed possible causes and provide you with the best solutions to troubleshoot effectively.

Keep reading to discover how to tackle this problem head-on!

Why Unagi Scooter Won’t Turn On?

There are a couple of reasons why your Unagi scooter might not be turning on. It could be a simple fix, like a loose connection or a dead battery.

First, check if the power cable connector at the base of the handlebars is screwed in tightly. Unagi scooters also won’t turn on if the battery is completely depleted. If those aren’t the culprits, it might be a more complex issue.

Here are some of the major reasons observed by many Unagi scooter users that may be the cause of your Unagi scooter not turning on.

1. Check the Battery Connection:

• Ensure that the battery is properly connected to the scooter. Loose connections can prevent the scooter from turning on.
• Examine the battery terminals for any signs of corrosion or rust, as this can disrupt the flow of electricity.

Issue	Possible Cause
1. No power	Loose battery connection
2. Intermittent power	Corroded battery terminals

To Fix These Issues:

1. Disconnect and reconnect the battery to ensure a secure connection.
2. Clean any corrosion off the terminals using a mixture of baking soda and water, then dry thoroughly before reattaching.

By checking and maintaining proper battery connections, you can troubleshoot and resolve one of the common reasons why an Unagi scooter may not turn on effectively.

2. Inspect the Power Button:

• Check if the power button is firmly pressed or stuck.
• Ensure there are no visible damages to the power button.
• Test if the power button responds when pressed.

If the power button appears to be functioning properly, move on to other potential causes. If not, follow these steps:

Solution:

• Gently press and release the power button multiple times.
• Use a compressed air duster to clean around the power button for any debris that might be obstructing it.
• If cleaning doesn’t work, consider consulting a professional technician for further assessment or replacement of the power button component.

By inspecting and addressing issues with your Unagi scooter’s power button, you can troubleshoot why it may not be turning on effectively.

3. Test the Charger:

• Make sure the charger is properly plugged into a working power outlet.
• Check if the charging port on your Unagi scooter is free from any debris or damage.
• Inspect the charger cable for any signs of wear or fraying that may indicate a malfunction.

If everything looks good with the charger, follow these steps to test it:

1. Plug the charger into an electrical outlet and ensure it’s receiving power.
2. Connect the charging port of your Unagi scooter to the charger securely.
3. Look for any indicator lights on the charger that show it’s functioning correctly.
4. Leave your scooter to charge for at least 30 minutes before attempting to turn it on again.

If after following these steps your Unagi scooter still doesn’t turn on, consider trying an alternative charger to rule out any issues with the original one.

4. Examine the Motor:

Possible Causes:

1. Loose Connections: Check if there are any loose connections between the motor and the battery.
2. Burned Out Motor: The motor might be burned out due to overuse or electrical issues.

Best Solutions:

Issue	Solution
Loose Connections	Tighten all connections securely using appropriate tools.
Burned Out Motor	Replace the motor with a new one from an authorized service center.

5. Troubleshoot the Control Board:

• Check for Loose Connections: Inspect all connections to ensure they are securely plugged in.
• Inspect for Water Damage: Look for any signs of water damage on the control board.
• Test Battery Voltage: Use a multimeter to check if the battery is delivering the correct voltage.
• Check Fuse:

Symptom	Possible Issue	Solution
Scooter not powering on	Blown fuse	Replace with a new fuse

1. Disconnect power source before inspecting or working on the control board.
2. Follow manufacturer’s guidelines when handling electrical components.
3. If unsure, seek professional assistance to avoid causing further damage.

6. Look for Physical Damage:

• Check the exterior of your Unagi scooter for any visible signs of physical damage.
• Inspect the handlebars, stem, deck, and wheels for cracks, dents, or scratches.
• Look for loose wires or cables that may have been damaged due to impact.

If you find physical damage on your Unagi scooter:

1. Handlebar/Stem Damage: If there is damage to the handlebar or stem, consider replacing them with new parts from the manufacturer.
2. Deck/Wheel Damage: For cracks or dents on the deck or wheels, contact Unagi customer support for guidance on repair options.
3. Wires/Cables: In case of damaged wires or cables, carefully replace them following a guide provided by Unagi.

7. Contact Unagi Support:

Issue: Faulty Battery Connection

• Possible Cause: Loose battery connection due to rough handling or vibrations.
• Solution: Check the battery connections and make sure they are securely attached.

Issue: Dead Battery

• Possible Cause: The battery is fully drained and needs recharging.
• Solution: Plug in the charger and allow the battery to charge for a few hours.

Issue: Defective Power Button

• Possible Cause: Malfunctioning power button preventing the scooter from turning on.
• Solution: Contact Unagi Support for assistance with repairing or replacing the power button.

Issue: Motor Failure

• Possible Cause The motor may have encountered a fault, causing it not to start.
• Solution: Reach out to Unagi Support for guidance on assessing and resolving potential motor issues.

FAQs

Latest Posts!