How To Make A 50cc Moped Go Faster? (A Complete Guide!)

How To Make A 50cc Moped Go Faster? Complete and Safe Guide! Looking to boost the speed of your 50cc moped without compromising safety? You’re in the right place.

In this comprehensive guide, we’ll explore practical and secure methods to enhance your 50cc moped’s speed while keeping you safe on the road.

How To Make A 50cc Moped Go Faster?

There are ways to tweak a 50cc moped for a bit more speed, but keep safety in mind. You can try a less restrictive air filter to improve airflow. Upgrading the carburetor can also help, but it often works best with other adjustments.

Remember, modifying your moped might affect emissions and legality, so check the regulations in your area.

Here Is the Step by Step Guide to Make Your 50cc Moped to Go with A Faster Pace.

1. Understanding Your 50cc Moped:

• Engine Type: Typically, a 50cc moped will have a single-cylinder engine with an automatic transmission.
• Power Output: These mopeds usually produce around 2 to 3 horsepower, making them ideal for city commuting.
• Speed Limitations: Due to their small engine size, most 50cc mopeds have a top speed of about 30 mph.
• Fuel Efficiency: They are highly fuel-efficient and can cover long distances on very little gas.
• Weight Capacity: The weight capacity of a typical 50cc moped is around 220 pounds (100 kg).
• Maintenance Requirements: Regular maintenance checks are crucial to ensure optimal performance and safety.

By understanding the basic features of your 50cc moped, you can better assess its current performance and identify areas for potential improvement.

2. Upgrading the Exhaust System:

Upgrading the exhaust system can significantly boost your 50cc moped’s performance. A high-performance exhaust allows for better airflow and faster expulsion of exhaust gases, resulting in increased power output.

1. Choosing the Right Exhaust: Look for aftermarket exhaust systems specifically designed for 50cc mopeds.
2. Installation Process: Ensure you have the necessary tools like wrenches, screwdrivers, and penetrating oil.
3. Performance Gains: Upgrading to a quality exhaust system can increase your moped’s top speed by up to 5-10 mph.
4. Considerations: Keep in mind that modifying your exhaust may affect noise levels; check local regulations.
5. Opt for expansion chamber pipes that enhance torque and horsepower.
6. Follow manufacturer instructions carefully to avoid any installation errors.
7. You’ll also notice improved acceleration due to better engine efficiency.
8. Regularly inspect and maintain your upgraded exhaust system for optimal performance.

3. Installing a Performance Carburetor:

Step 1: Gather the necessary tools and equipment:

• Performance carburetor
• Socket wrench set
• Screwdrivers
• Clean rags

Step 2: Prepare your workspace by ensuring proper lighting and ventilation.

Step 3: Remove the seat of the moped to access the engine compartment.

Step 4: Locate the existing carburetor. It is usually connected to the engine with bolts or screws.

Step 5: Carefully disconnect any hoses, cables, or connections attached to the carburetor.

Step 6: Unscrew and remove the old carburetor from the engine. Be cautious not to damage any surrounding components.

Old Carburetor	New Performance Carburetor
Size: Standard	Size: Larger for increased airflow
Air-to-Fuel Ratio: Fixed	Air-to-Fuel Ratio: Adjustable for tuning

Step 7: Install the new performance carburetor in place of the old one. Ensure it is securely fastened to prevent air leaks.

Step 8: Reconnect all hoses, cables, and connections back to the new carburetor as they were on the old one.

Step 9: Double-check all connections are tight and secure before replacing the seat of your moped.

By following these steps carefully, you can successfully install a performance carburetor on your moped. This upgrade will improve airflow and allow you to adjust air-to-fuel ratios for optimal performance gains while ensuring safe operation throughout your rides.

4. Adjusting the Transmission Gear Ratio:

• Step 1: Understand Your Current Gear Ratio: Check your moped’s user manual or consult with a mechanic to determine the existing gear ratio.
• Step 2: Determine Desired Speed Increase: Decide how much faster you want your 50cc moped to go and calculate the new gear ratio needed for that speed increase.
• Step 3: Upgrading the Front Sprocket: Increasing the front sprocket size will result in higher top speeds, but it may reduce acceleration. Consult with a professional to choose the right size for your desired speed gain.
• Step 4: Changing Rear Sprocket Size: A larger rear sprocket will improve acceleration but lower top speed, while a smaller one will do the opposite. Consider this when adjusting your gear ratio.
• Step 5: Test and Fine-Tune: After making changes, test ride your moped carefully to ensure both safety and performance enhancements.

5. Enhancing Air Intake and Filter:

• Upgrade to a High-Flow Air Filter: Install a high-flow air filter to allow more air into the engine, resulting in improved performance.
• Clean or Replace Air Filter Regularly: Ensure your air filter is clean and free of debris as a clogged filter can restrict airflow and decrease speed.
• Install an Aftermarket Air Intake System: Consider investing in an aftermarket air intake system for increased airflow efficiency.
• Check for Air Leaks: Inspect the intake system for any leaks that could be letting unfiltered air into the engine, affecting its performance.
• Tune Carburetor Settings: Adjust carburetor settings to optimize the air-fuel mixture ratio after upgrading your air intake system.

6. Optimizing Fuel Delivery System:

Step	Description
1	Clean existing fuel system components.
2	Check for any blockages or leaks.
3	Upgrade to larger diameter fuel lines.
4	Install a high-flow inline fuel filter.

• Upgrade to a High-Performance Carburetor: Replace the stock carburetor with a high-performance one to enhance fuel delivery.
• Adjust Air-Fuel Mixture: Fine-tune the air-fuel mixture ratio for optimal combustion and increased speed.
• Install a Performance Air Filter: Switch to a performance air filter that allows better airflow, improving fuel efficiency.
• Upgrade Fuel Lines and Filters: Replace old fuel lines and filters with high-flow ones to ensure proper fuel delivery.

7. Fine-Tuning for Speed and Safety:

• Upgrade the Exhaust System: Install a performance exhaust for better airflow.
• Modify the Carburetor: Adjust the carburetor to optimize fuel delivery.
• Change the Sprockets: Consider changing sprockets for improved acceleration or top speed.
• Upgrade Air Filter: Use a high-flow air filter to enhance engine performance.

Tips for Safety
5. Inspect Regularly: Check brakes, tires, and lights frequently.
6. Wear Protective Gear: Always wear a helmet and proper riding gear.

Remember that modifying your moped can affect its safety and legality on public roads; always ensure any modifications comply with local laws before attempting them.

By following these tips, you can safely enhance your 50cc moped’s speed while enjoying an improved riding experience.

Latest Posts!